imc 2433 series c jan. 15, 2010 page 1 of 1 frontier electronics corp. 667 e. cochran street, simi valley, ca 93065 tel: (805) 522-9998 fax: (805) 522-9989 e-mail: frontiersales@frontierusa.com web: frontierusa.com insert molded coil? 2433 series a. mechanical drawing: b. electrical specification: part no. l min. (uh) l nom. (uh) l max. (uh) q min. @ l nom. color 2433-01 0.047 0.048 0.049 90 @ 50mhz brown 2433-02 0.068 0.078 0.085 100 @ 50mhz red 2433-03 0.090 0.108 0.126 100 @ 50mhz orange 2433-04 0.117 0.146 0.175 94 @ 50mhz yellow 2433-05 0.148 0.190 0.232 88 @ 50 mhz green 2433-06 0.188 0.240 0.292 78 @ 50 mhz blue 2433-07 0.231 0.292 0.350 72 @ 50 mhz violet 2433-08 0.272 0.342 0.412 68 @ 50 mhz gray 2433-09 0.330 0.405 0.480 66 @ 40 mhz white 2433-10 0.390 0.465 0.540 60 @ 40 mhz black c. features: 1. plastic molded. 2. high reliability. 3. low cost. d. measurement: 1. q and l measured with ?? long of tcw#16 soldered al ong the coil leads and with one end flush with the bottom of the coil then bent ?? down from stand off at an angle of 90 . 2. l min. measured with core halfway out of the top of the form. 3. inductance greater than 0.1uh read at recommended q meter frequency. 4. inductance below 0.1uh calculated from readings taken at 50mhz. e. test equipment: q meter (hp 4342a)
|
